CCNA LAB - 3.1 Point-to-Point Protocol (PPP) – PAP

Download

LAB 3-1: Point-to-Point Protocol (PPP) - PAP

You are the Network Administrator at Ranet, and have to config both router Ranet-BR1 and
Ranet-BR2 to allow the connection between Host1 and Host2 via PPP link as below:
(Use Console for config each router)

1. Enable and set IP address on Lan interface for each router to be the last assignable IP address in its own subnet.

2. Enable and set IP address on interface s0/0/0 on Ranet-BR1 to be the first assignable IP in network 192.168.0.224/30

3. Enable and set IP address on interface s0/0/0 on Ranet-BR2 to be the last assignable IP in the same network.
Don’t forget to set clock rate at 64 kbps due to this is the DCE.

4. Set encapsulation on this link to be PPP and use username and password as:
user: ranetpapuser
pass: ranetpappass
by using PAP as authentication protocol

If everything is done, Host1 has to be able to
connect with Host2.

------------------------- The End ------------------------------

Solution
Read more »