CCNA LAB - 4.9 DHCP (Dynamic Host Configuration Protocol)

DownloadLAB 4-9: Dynamic Host Configuration Protocol (DHCP)You are the network administrator at Ranet, and have to configure the router Ranet-GW to connectbetween LAN and Internet, and to do as DHCP server for LAN as below:(via Console)1. Enable and set IP address on LAN interface to be the first IP of the subnet 10.0.0.128/282. Enable and set IP address on serial interface to be the last IP of t

Read more »

CCNA LAB - 4.8 Virtual Private Network (VPN) - IPsec (Site-to-Site)

DownloadLAB 4-8: Virtual Private Network (VPN) – IPsec (Site-to-Site)You are the Network Administrator at Ranet Branch Office, and have to newly configure the Ranet-Br router to let your own host connect to the internet and connect to the hosts in Headquarter (192.168.0.0/24) via Site-to-Site IPsec VPN as below:(configure via console terminal for Ranet-BR router)1. Enable LAN interface on Ranet-B

Read more »

CCNA LAB - 4.7 NAT

DownloadLAB 4-7: Network Address Translation (NAT)You are the network administrator at Ranet, and have to config the Ranet-GW router via Console Terminal to let hosts in our LAN that have IP address: 192.168.0.193 - 192.168.0.206 can connect to the internet.Your ISP has given global IP for 6 IP as 25.5.5.65 - 25.5.5.70.Remark: 1. Use ACL no.1 for Local IP list.2. Use pool name “Ranet” for Global

Read more »

CCNA LAB - 4.6 Access List

DownloadLAB 4-6: Access Control List (ACL)You are the network administrator at Ranet, and have to config router Ranet-HQ to connect its LANto Branch network and Internet, and to config Access-List to control traffic as below:(via its console)1. Enable and set IP address on LAN interface to be the first assignable IP of this subnet.2. Enable and set IP address on each serial interface to be the la

Read more »

CCNA LAB - 4.5 Port Security

DownloadLAB 4-5: Port SecurityYou are the network administrator at Ranet,and would like to enable Port-Security on the access ports of Ranet-SW to prevent the use of another switch connected that let multiple hosts connect through the same port at the same time, and to prevent the unauthorized host connect via some port.So all you have to do are: (Config via Console)1. Enable Port-Security on all

Read more »

CCNA LAB - 4.4 IP Routing – EIGRP

DownloadLAB 4-4: IP Routing – EIGRPYou are the network administrator at Ranet, and have to config the routers both Ranet-HQ and Ranet-BR to make the connection throughout Ranet network and with the Internet. So all you have to do are:(Config via console of each router.)1. Enable and set IP address on LAN interface of each router to be the last assignable IP of each subnet.2. Enable serial interfa

Read more »

CCNA LAB - 4.3 IP Routing – OSPF

DownloadLAB 4-3: IP Routing – OSPFYou are the network administrator at Ranet, and have to config the routers both Ranet-HQ and Ranet-BR to make the connection throughout Ranet network and with the Internet.So all you have to do are:(Config via console of each router.)1. Enable and set IP address on LAN interface of each router to be the last assignable IP of each subnet.2. Enable serial interface

Read more »

CCNA LAB - 4.2 IP Routing - RIP

DownloadLAB 4-2: IP Routing - RIP You are the network administrator at Ranet, and have to config the routers both Ranet-HQ and Ranet-BR to make the connection throughout Ranet network and with the Internet. So all you have to do are:(Config via console of each router.) 1. Enable and set IP address on LAN interface of each router to be the first assignable IP of each subnet. 2. Enable serial

Read more »

CCNA LAB - 4.1 IP Routing - Static and Default Route

DownloadLAB 4-1: IP Routing – Static and Default RouteYou are the network administrator at Ranet, and have to config the routers both Ranet-HQ and Ranet-BR to make the connection throughout Ranet network and with the Internet. So all you have to do are:(Config via console of each router.)1. Enable and set IP address on LAN interface of each router to be the last assignable IP of each subnet.2. En

Read more »

CCNA LAB- 3.4 Frame Relay - Point to Point

DownloadLAB 3-4: Frame Relay – Point-to-Point (Subinterface)You are the network administrator at Ranet Headquater, and have to configure the router “Ranet-HQ” to let Host1 connect with Host2, Host3 and Host4 as below:(Use console to config this router.)1. Enable and set IP address on LAN interface to be the first IP of this subnet.2. Enable serial interface, and create subinterface with Frame-Rel

Read more »

CCNA LAB - 3.3 Frame Relay – Multipoint

DownloadLAB 3-3: Frame Relay – MultipointYou are the network administrator at Ranet Headquater, and have to configure the router “Ranet-HQ” to let Host1connect with Host2, Host3 and Host4 as below:(Use console to config this router.)1. Enable and set IP address on LAN interface to be the first IP of this subnet.2. Enable and set IP address on serial interface to be the first IP of its subnet, and

Read more »

CCNA LAB - 3.2 Point-to-Point Protocol (PPP) – CHAP

DownloadLAB 3-2: Point-to-Point Protocol (PPP) – CHAPYou are the Network Administrator at Ranet, and have to config both router Ranet-BR1 andRanet-BR2 to allow the connection between Host1 and Host2 via PPP link as below:(Use Console for config each router)1. Enable and set IP address on Lan interface for each router to be

Read more »

CCNA LAB - 3.1 Point-to-Point Protocol (PPP) – PAP

DownloadLAB 3-1: Point-to-Point Protocol (PPP) - PAP You are the Network Administrator at Ranet, and have to config both router Ranet-BR1 andRanet-BR2 to allow the connection between Host1 and Host2 via PPP link as below:(Use Console for config each router)1. Enable and set IP address on Lan interface for each router to be the last assignable IP address in its own subnet.2. Enable and set IP addr

Read more »

CCNA LAB - 2.3 Spanning Tree Protocol (STP)

DownloadLAB 2-3: Spanning Tree Protocol (STP) You are the Network Administrator of Ranet, and would like: - Ranet-CoreSW to be the Root Bridge - Port Fa0/2 of Ranet-SW2 to be in the blocking state Please config spanning-tree parameter on both Ranet-CoreSW and Ranet-SW2 via its console to be as the requirement above. Rem

Read more »

CCNA LAB - 2.2 Virtual Trunking Protocol (VTP)

DownloadLAB 2-2: Virtual Trunking Protocol (VTP) You are the Network Administration at Ranet, and have to config to let Ranet-SW3 seperate VLAN according to the VLAN database from Ranet-SW1 via VTP (use Console for each switch) as below: 1. Gather information about VTP configuration in Ranet-SW1 by using "show" command in USER mode only. (You

Read more »

CCNA LAB - 2.1 InterVLAN Routing

DownloadLAB 2-1: InterVLAN Routing You are the Network Administrator at Ranet, and have to config both switch "Ranet-SW" and router "Ranet-GW" via its console terminal as below: 1. Set Ranet-SW to seperate VLAN to be VLAN 10 and VLAN 20 and set its member as: VLAN 10: Fa0/1, Fa0/2 VLAN 20: Fa0/3, Fa0/4

Read more »

CCNA Lab -1.3 IPv6 addressing

DownloadLAB 1-3: IPv6 Addressing You are the network administrator at Ranet, and have to config Ranet-HQ (via Console Terminal) for connection t use IPv6 as below: 1. set IPv6 address on interface Se0/0/0 to be FEC0:78:0:1::2/64 2. set IPv6 address on interface Se0/1/0 to be 2001:21::2/48 3. Set IPv6 addre

Read more »

CCNA Lab -1.2 IPv4 addressing

Download LAB 1-2: IPv4 AddressingYou are the network administrator at Ranet, andhave to config the router “Ranet-BR” via ConsoleTerminal as below:1. enable interface Se0/0/0 and set IP address/Subnet Mask that can connect with router“Ranter-HQ” at 192.168.0.254/302. enable interface Se0/1/0 and set IP address/Subnet Mask that can connect with router“Ranter-BR1-1″ at 192.168.0.30/303. The He

Read more »

CCNA Lab – 1.1- Basic Config

LAB 1-1: Basic Configuration You are the Network Administrator at Ranet. We have just installed new router to be our gateway. You have to do the basic configuration via Console Terminal (PC-PT) as below: 1. Set hostname to be "RanetA" 2. Set enable secret to be "ranetenablepass" 3. Set con

Read more »

Basic Switch Configurations Command

Basic Switch Configurations CommandIn this article I will introduce the Cisco Internetwork Operating System (IOS) command line interface (CLI) for the 2960 series switch. You will need to logon to a switch and become familiar with the different levels of access on the switch. You will also become familiar with the commands available to you in each mode (user or privileged) and the switch

Read more »